Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 195)

◦ Inward Winding ◦
Important
• Secure the left and right edges of the roll paper with tape within 1.97 inches (50 mm) of •
the edges so that neither end of the roll paper lift up.
• When rewinding heavyweight paper, use strong adhesive tape to fasten it. Otherwise, a •
rewinding problem may result.
• If you use a paper core narrower than the paper to be wound, adjust the position of the •
holder stopper, so that there is a gap between the holder stopper and the paper.
5. Make sure the leading edge of the roll paper is not lifting up from the paper core, and if there 5.
are places lifting up, tape in additional places so that the paper does not lift up.
6. Push roll holder downward, check that roll holder is not lifting up, and tap OK . 6.
◦ Outward Winding ◦
195