Level roll papers – Canon imagePROGRAF TX-3100 36" Printer with Basket User Manual
Page 574
Printing by Automatically Switching Upper-level and Lower-
level Roll Papers
You can print by automatically switching Roll Paper 1 and Roll Paper 2 depending on the print job.
The procedure for printing by automatically switching Roll Paper 1 and Roll Paper 2 is as follows:
1.
Select the paper size from the
1.
For the
Paper Size
, select the same size as the source document created by the application software.
2.
Select
Quality & Media
from the pop-up menu
2.
3.
Select the media type
3.
For
Media Type
, select the same paper type loaded in the printer.
If
Auto (Use Printer Settings)
is selected, the paper configured in printer settings is printed.
4.
Select the paper source
4.
For
Paper Source
, select
Roll Paper (Auto)
.
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
5.
Select
Page Processing
from the pop-up menu
5.
6.
Selecting Roll Paper Width
6.
For
Roll Paper Width
, select the width of the roll paper loaded in the printer.
574