Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 114)

Changing the Type of Paper
Follow these steps to change the type of paper specified on the printer after you have loaded paper.
If you continue using the same type of paper and set Keep media type to Enable , when you load paper, the
media type selected before Enable was set is selected automatically, eliminating the need to set the media
type. (See " Using the Same Type of Paper Regularly .")
Note
• This printer has the ability to estimate the media type by the data read by the sensor when the paper •
is set. If you continue to use this feature, you will learn the data that you read and the accuracy of the
media type estimation. If you continue to use multiple media types, this feature will reduce the need to
select the media type each time you set the paper. (See "
Paper-related settings .")
Important
• For best printing results, the printer fine-tunes the print head height and the feed amount for each type •
of paper. Be sure to select the type of paper to use correctly before printing.
• Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of •
printed images may vary depending on the type of paper used. If margins and the size of images are
not as you expected, adjust the paper feed amount.
(See " Adjusting Feed Amount .")
• Rolls and sheets have different printing areas, and sheets having a larger bottom margin than rolls. •
(See " Print Area .")
Changing the Type of Paper
Note
• When you load roll paper, a menu for selecting the media type appears on the touch screen. Tap the •
media type.
If no barcode has been printed on the roll paper and you have set Manage remaining roll amount to
Barcodes , specify the roll length after selecting the media type. (See " Specifying the Paper Length .")
1. Tap paper settings display area on Home screen of touch screen. 1.
114