Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 146)

5. Tap Cutting mode . 5.
6. Tap User cut . 6.
7. When Do you want to set to detect the leading edge of the paper? is displayed, select 7.
Do not detect .
Note
• If you set the detection of paper leading edge to Do not detect , a margin of about 4.0 inches •
(10 cm) is created at the paper leading edge when printing starts.
• When the detection of paper leading edge is set to Do not detect , printing will start at the •
position at which the roll was set for the first printing after replacing a roll. Thus, the margin of
the paper leading edge will enlarge.
(See " Loading the Upper Roll on the Printer .")
8. Tap Back button twice to display roll paper screen. 8.
9. Tap Feed/cut . 9.
10. Tap or touch Advance or Rewind and align paper's leading edge with position (A). 10.
11. Print the job. 11.
The printer stops advancing the paper after printing.
12. Tap Advance paper . 12.
Roll paper is fed to the specified cut position and then automatically stopped.
146