Canon imagePROGRAF TX-3100 36" Printer with Basket User Manual
Page 250
For the items that can be set, see the following.
•
Print details
•
Prints out the LAN setting information of the printer with Wi-Fi connection, wired LAN connection,
wireless direct connection.
For the items that can be checked, see the following.
Important
• Important information on your computer is stated on the paper on which the LAN setting information
is printed. Please handle with care enough.
Note
• You can also print out the LAN setting information by tapping in the following order.
•
Printer settings
>
Test print
>
Print LAN details
•
Advanced
•
By tapping
Advanced
on each setting screen of Wi-Fi connection, wired LAN connection, wireless direct
connection, LAN information can be set in detail.
Important
• If the LAN is disabled, the following items can not be selected.
◦
Set printer name
◦
Specifies the printer name. You can use 2 to 15 characters for the name.
Note
You cannot use the same printer name as that already used for other LAN connected devices.
You cannot use a hyphen for the initial or last character of the printer name.
◦
TCP/IP settings
◦
Performs IPv4 or IPv6 setting.
◦
WSD settings
◦
Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows
8.1, and Windows 7).
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows 10, Windows 8.1, and Windows 7.
Optimize inbound WSD
250