Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 642)

4. Select printer 4.
Select your model from the Printer list in the Print dialog.
Note
• Click Show Details to switch the setup window to the detailed display.
5. Check print settings 5.
Set paper size and other items as needed.
Set paper type from the printer.
Note
• Use the Print dialog to set general print settings such as the layout and the print sequence.
For information about print settings, refer to macOS help.
• You can set Print quality settings ( Color mode , Print resolution , and Print target ), Paper
settings ( No Top/Btm Space (Save Paper) and Unidirectional printing ), and Magnification
level for borderless on the operation panel of the printer. For details, see " Print settings ."
6. Click Print 6.
The printer prints according to the specified settings.
Note
• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking
that the printer is connected to the network.
• You cannot use AirPrint if Bonjour settings of printer are disabled. Check LAN settings of printer and
enable Bonjour settings.
• Refer to " Cannot Print Using AirPrint " for printing problems when using AirPrint.
• The display of the settings screen may differ depending on the application software you are using.
642