Epson PictureMate - Manual (Page 9)

8
Loading Paper
1. Open the output tray.
Note: Keep the PictureMate handle to the back, under the paper feeder and all
the way down, to allow paper to feed through.
2. Open the paper support.
3. Pull up the top of the paper support.
4. Place your PictureMate Photo Paper against the right edge, with the glossy side
up.
Caution: Don’t load plain paper, this may cause damage to PictureMate.
Note: Load a maximum of 20 sheets at one time. If you are printing more than 20
photos, PictureMate will prompt you when it is time to load more paper. Make
sure paper is glossy side up to prevent smearing. For best results, don’t touch the
glossy surface of the paper.
Load
glossy side
up
Open and pull up
paper support
Open output tray
Move
handle all
the way
down