Mounting and setup the connect experience, Unpacking surface hub, Lifting surface hub – Microsoft Surface Hub 2 SmCamera User Manual
Page 508
For unpacking information, refer to the unpacking guide included in the shipping
container. You can open the unpacking instructions before you open the shipping
container.
The 55” Surface Hub requires two people to safely lift and mount. The 84” Surface Hub
requires four people to safely lift and mount. Those assisting must be able to lift 70
pounds to waist height. Review the unpacking and mounting guide for details on lifting
Surface Hub.
There are three ways to mount your Surface Hub:
Wall mount
: Lets you permanently hang Surface Hub on a conference space wall.
Floor support mount
: Supports Surface Hub on the floor while it is permanently
anchored to a conference space wall.
Rolling stand
: Supports Surface Hub and lets you move it to other conference
locations.
For specifications on available mounts for the original Surface Hub, see the following:
Downloadable resources for Surface Hub readiness
Connect lets people project their laptop, tablet, or phone to the Surface Hub screen.
Connect allows wireless or wired connection types.
Unpacking Surface Hub
）
Important
Retain and store all Surface Hub shipping materials—including the pallet, container,
and screws—in case you need to ship Surface Hub to a new location or send it for
repairs. For the 84” Surface Hub, retain the lifting handles.
Lifting Surface Hub
Mounting and setup
The Connect experience