Migration and installation workflow, Migration and installation workflow summary – Microsoft Surface Hub 2 SmCamera User Manual

Page 156

Two USB drives that have 16 GB of storage, FAT32 format
The drivers and firmware for Windows 10 Pro and Enterprise in a Surface Hub 2
Microsoft Windows Installer (MSI) file
Internet connection
Imaging solution (optional)

Step Action

Summary

Verify the UEFI
version on the
Surface Hub 2S

The UEFI version must be version

694.2938.768.0

or later.

Download Surface
UEFI Configurator
and the Surface
Hub 2 drivers and
firmware.

On the

Surface Tools for IT

page, select

Download

. Then select

and download the

Surface UEFI Configurator MSI file

, and install it

on a separate PC. Also download the

Drivers and firmware for

Windows 10 Pro and Enterprise OS on Surface Hub 2 MSI file

Save this package for use in step 5.

Prepare the SEMM
certificate.

Prepare the certificate that's required to run Surface UEFI
Configurator, or use your current certificate.

Create a SEMM
package.

Start Surface UEFI Configurator to create a SEMM package on a USB
drive. This package will contain the configuration files you need to
apply on Surface Hub 2S. Copy these SEMM package files to a
folder on your PC.

Load a USB flash
drive with Windows
10 image, the
SEMM package,
and drivers and
firmware.

Create a USB drive that contains a Windows 10 image. In this
example, the drive is named

BOOTME

. Add the drivers and firmware

for Windows 10 Pro and Enterprise OS on Surface Hub 2 (from step
2) and the SEMM package files (from step 4) to the

BOOTME

drive.

Update the UEFI on
the Surface Hub 2S
to enable OS
migration.

Use the

BOOTME

drive to boot the Surface Hub 2S to the UEFI

menu and install the SEMM package.