Configure recommended settings, Install surface hub 2 drivers and firmware – Microsoft Surface Hub 2 SmCamera User Manual

Page 176

power cord again, the device should boot after a few seconds. Then you'll see the
white logo in the middle of screen.

If the device doesn't turn on, press and release the power button. Immediately
after you see the logo in the middle of the screen, press and hold the Volume
down button until you see the spinning circle below the white logo.

3. When the out-of-box experience (OOBE) setup starts, follow the instructions to

install Windows 10/11 Pro or Enterprise (version

20H2

or later).

To ensure that your Surface Hub 2 is up to date, install

drivers and firmware for

Windows 10 Pro and Enterprise

. Then reboot the device. Keep the Surface turned on

for an hour, and then reboot it again. You won't be prompted for the second reboot.
This pause and extra reboot ensures that the firmware has been fully updated.

To configure Surface Hub 2S as a personal productivity device, see

Configure Windows

10/11 Pro or Enterprise on Surface Hub 2

If you want to restore your device to Windows 10 Team, see

Reset and recovery for

Surface Hub 2S

. Before you roll back to Windows 10 Team, we recommend that you first

unenroll the Surface Hub from SEMM. To learn more, see

Unenroll Surface devices from

SEMM

Install Surface Hub 2 drivers and firmware

Configure recommended settings