Microsoft Surface Hub 2 SmCamera User Manual
Page 490
Connector and
location
Label
Description
Switch, bottom I/O
Switches the function between using internal PC or external
PC.
Display port, bottom
I/O
Provides input for replacement PC.
USB type B, bottom
I/O
Provides USB connection for replacement PC to internal
peripherals.
USB type B, bottom
I/O
Provides USB connection for integrated hub.
Connector and location
Label
Description
Display port, bottom I/O
Provides input for wired connect PC.
HDMI, bottom I/O
Provides HDMI input for wired connect PC.
VGA, bottom I/O
Provides VGA input for wired connect PC.
3.5mm, bottom I/O
Provides analog audio input.
Surface Hub can be used continuously for a maximum of 18 hours a day. To
optimize for efficiency, Surface Hub uses smart sensors to turn off the LED screen
when presence is no longer detected, which means there is no need to power it
down at the end of the day. If the unit is installed in a 24-hour workplace
environment, the sensors can be disabled to comply with the 18 hour per day
maximum use recommendation. Note that prolonged display of a video signal may
cause burned-in or image retention to occur on the screen. To learn more about
managing power settings, see:
Local management Surface Hub settings
Replacement PC connections
Wired connect connections