Microsoft Surface Hub 2 SmCamera - Manual (Page 121)

1. Download and install the Surface Hub Replacement PC driver package on the
replacement PC.
2. Turn off the Surface Hub using the power switch next to the power cable.
3. Connect the cables from the Surface Hub's replacement PC ports to the
replacement PC. These ports are usually covered by a removable plastic cover.
55" Surface Hub: Connect one DisplayPort cable and two USB cables.
84" Surface Hub: Connect two DisplayPort cables and two USB cables.
4. Toggle the Mode switch to Replacement PC . The Mode switch is next to the
Replacement PC ports.
5. Turn on the Surface Hub using the power switch next to the power cable.
6. Press the power button on the right side of the Surface Hub.
You can switch the Surface Hub to use the internal PC.
1. Turn off the Surface Hub using the power switch next to the power cable.
2. Toggle the Mode switch to Internal PC. The Mode switch is next to the
Replacement PC ports.
3. Turn on the Surface Hub using the power switch next to the power cable.
The Surface Hub includes a Video Out port for mirroring visual content from the Surface
Hub to another display.
Replacement PC setup instructions
To use Replacement PC Mode
 Tip
Set sleep or hibernation on the replacement PC so the Surface Hub will turn
off the display when it isn't being used.
To switch back to internal PC
Video Out