Enterasys Networks 7S4280-19-SYS - Manual (Page 92)

7C111 Chassis Specifications and Regulatory Compliance
A-2 Specifications and Regulatory Compliance
Power Supply
Environmental Requirements
The environmental specifications for the N1 chassis system are as follows:
Regulatory Requirements
Table A‐4 provides the safety and electromagnetic compatibility (EMC) requirements met by the
N1 chassis system:
Table A-2 7C111 Power Supply Specifications
Item Specification
Electrical
Accepts up to (2) IEC320 C13 power cord plugs
Input Frequency: 50 to 60 Hz
Input (Voltage/Amps): 2 x 100 to 125 Vac ~ 3.6 A
2 x 200 to 240 Vac ~ 1.6 A
Input Power: 400 W
Output Voltages: 5 V @ 40 amps
12 V @ 5.5 amps
3.3 V @ 40 amps
-12 V @ 2 amps
Table A-3 Environmental Specifications
Item Specification
Operating Temperature: 5°C to 40°C (41°F to 104°F)
Storage Temperature: -30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity: 5% to 90% (non-condensing)
Table A-4 Regulatory Compliance Standards
Item Specification
Safety: Safety: UL 60950, CSA C22.2 No. 60950, 2006/95/EC,
EN 60950, IEC 60950.
Modules which support laser connections also meet the
EN 60825 and 21 CFR 1040.10 standards.
Electromagnetic Compatibility (EMC) FCC: 47 CFR Parts 2 and 15, CSA C108.8, 2004/108/EC, EN
55022, EN 61000-3-2, EN 61000-3-3, EN 55024,
AS/NZS CISPR 22, VCCI V-3.