DJI Mavic 3 Pro Drone with Fly More Combo & RC - Manual (Page 81)

DJI Mavic 3 Pro User Manual
© 2023 DJI All Rights Reserved.
81
Battery Level LEDs
Blinking Pattern Battery Level
76%-100%
51%-75%
26%-50%
0%-25%
Remote Controller Alert
The remote controller beeps to indicate an error or warning. Pay attention when prompts
appear on the touchscreen or in DJI Fly. Slide down from the top of the screen and select Mute
to disable all alerts, or slide the volume bar to 0 to disable some alerts.
The remote controller sounds an alert during RTH. The alert cannot be canceled. The remote
controller sounds an alert when the battery level of the remote controller is low (6% to 10%).
A low battery level alert can be canceled by pressing the power button. The critical low battery
level alert, which is triggered when the battery level is less than 5%, cannot be canceled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the remote
controller is positioned towards the aircraft as depicted below.
Optimal Transmission
Weak Signal
• DO NOT operate other wireless devices at the same frequency as the remote controller
to avoid signal interference.
• A prompt will be displayed in DJI Fly if the transmission signal is weak during flight.
Adjust the remote controller orientation to make sure that the aircraft is in the optimal
transmission range.