DJI Mavic 3 Pro Drone with Fly More Combo & RC - Manual (Page 61)

DJI Mavic 3 Pro User Manual
© 2023 DJI All Rights Reserved.
61
Gimbal and Camera
Gimbal Profile
The 3-axis gimbal provides stabilization for the camera, allowing you to capture clear and stable
images and video. The control tilt range is -90° to +35° and the control pan range is -5° to +5°.
Use the gimbal dial on the remote controller to control the tilt of the camera. Alternatively, do
so through the camera view in DJI Fly. Press and hold the screen until the camera adjustment
bar appears. Drag the bar up or down to control the tilt and left or right to control the pan.
Gimbal Operation Modes
Two gimbal operation modes are available. Switch between the operation modes in Settings >
Control in DJI Fly.
Follow Mode: the angle of the gimbal remains stable relative to the horizontal plane. Users can
adjust the gimbal tilt. This mode is suitable for shooting stills.
FPV Mode: when the aircraft is flying forward, the gimbal synchronizes with the movement of
the aircraft to provide a first-person flying experience.
• DO NOT tap or knock the gimbal after the aircraft is powered on. Launch the aircraft
from open and flat ground to protect the gimbal during takeoff.
• After installing the wide-angle lens, make sure the gimbal is level and forward before
takeoff, so that the aircraft can correctly detect the installation status of the Wide-Angle
Lens. The gimbal will be level when the aircraft is powered on, if the gimbal rotates,
recenter the gimbal using the remote controller or DJI Fly, as follows:
a. Tap Recenter Gimbal on the Settings > Control page of DJI Fly.
b. Press the Customizable C1 Button on the remote controller (the default function
recenters the gimbal and points the gimbal downward, this can be customized).
• Pano and Asteroid functions will not be available after the Wide-Angle Lens is installed.
• Precision elements in the gimbal may be damaged by a collision or impact, which may
cause the gimbal to function abnormally.
• Avoid getting dust or sand on the gimbal, especially in the gimbal motors.
• A gimbal motor may enter protection mode in the following situations: a. The aircraft
is on uneven ground, and the gimbal is obstructed. b. The gimbal experiences an
excessive external force, such as during a collision.
-5°
5°
-90°
0°
35°