DJI Mavic 3 Pro Drone with Fly More Combo & RC - Manual (Page 50)

DJI Mavic 3 Pro User Manual
50
© 2023 DJI All Rights Reserved.
Vision Systems and Infrared Sensing System
DJI Mavic 3 Pro is equipped with both an infrared sensing system and horizontal, upward, and
downward vision systems.
The upward and downward vision systems consist of two cameras each, and the forward,
backward, and lateral vision systems consist of four cameras in total.
The infrared sensing system consists of two 3D infrared modules. The downward vision
system and infrared sensing system help the aircraft maintain its current position, hover more
precisely, and fly indoors or in other environments where GNSS is unavailable.
The auxiliary light located at the bottom of the aircraft can assist the downward vision system.
It will automatically turn on by default in low-light environments when the flight altitude is
under 5 m. Users can also turn it on or off manually in the DJI Fly app. Each time the aircraft is
restarted, the auxiliary bottom light will revert back to the default setting Auto.
• The auxiliary LED is set to auto when used in the EU and cannot be changed. The
aircraft Front Arm LEDs are always on when used in the EU and cannot be changed.
Detection Range
Forward Vision System Precision Measurement Range: 0.5-20 m; FOV: 90° (horizontal),
103° (vertical)
Backward Vision System Precision Measurement Range: 0.5-16 m; FOV: 90° (horizontal),
103° (vertical)
Lateral Vision System Precision Measurement Range: 0.5-25 m; FOV: 90° (horizontal),
85° (vertical)
Upward Vision System Precision Measurement Range: 0.2-10 m; FOV: 100° (front and
back), 90° (left and right)
Downward Vision System Precision Measurement Range: 0.3-18 m; FOV: 130° (front and
back), 160° (left and right)
The Downward Vision System works best when the aircraft is at
an altitude of 0.5 to 30 m.
Upward Vision System
Horizontal
Omnidirectional
Vision System
Horizontal Omnidirectional Vision System
Infrared Sensing System
Auxiliary Bottom Light
Downward Vision System