Activating the dji mavic 3 pro aircraft, Binding the aircraft and remote controller, Updating firmware – DJI Mavic 3 Pro Drone with Fly More Combo & RC User Manual
Page 12
![background image](https://www.manualsdir.com/files/871078/content/doc012.png)
DJI Mavic 3
Pro User Manual
12
©
2023 DJI All Rights Reserved.
4. The remote controller needs to be activated before first use and an internet connection is
required for activation. Press, and then press again and hold the power button to power on
the remote controller. Follow the on-screen prompts to activate the remote controller.
Follow the steps below to prepare the DJI RC remote controller.
1. Remove the control sticks from the storage slots on the remote controller and screw them
into place.
2. The remote controller needs to be activated before first use and an internet connection is
required for activation. Press, and then press again and hold the power button to power on
the remote controller. Follow the on-screen prompts to activate the remote controller.
Activating the DJI Mavic 3 Pro Aircraft
DJI Mavic 3 Pro requires activation before first use. After powering on the aircraft and remote
controller, follow the on-screen prompts to activate DJI Mavic 3 Pro using DJI Fly. An internet
connection is required for activation.
Binding the Aircraft and Remote Controller
It is recommended to bind the aircraft and remote controller to help ensure the best possible
after-sales service. Follow the on-screen prompts after activation to bind the aircraft and
remote controller.
Updating Firmware
A prompt will appear in DJI Fly when new firmware is available. Update the firmware whenever
prompted to ensure optimal user experience.
1
2