DJI Mavic 3 Pro Drone with Fly More Combo & RC - Manual (Page 29)

DJI Mavic 3 Pro User Manual
© 2023 DJI All Rights Reserved.
29
Using FocusTrack
1. Takeoff.
2. Drag-select the subject in the camera view, or enable Subject Scanning under Control
settings in DJI Fly and tap the recognized subject to enable FocusTrack.
• FocusTrack must be used within the supported zoom ratio as follows, otherwise it will
affect subject recognition:
a. Spotlight/Point of Interest: supports moving subjects such as vehicles, boats, people,
and stationary subjects up to 7x zoom. The tele camera only supports stationary
subjects.
b. ActiveTrack: supports moving subjects such as vehicles, boats, and people up to 3x zoom.
a. The aircraft will enter Spotlight by default.
b. Tap on the bottom of the screen to switch to Point of Interest. After setting the direction
and speed, tap GO to start flying.