AG Neovo DR-22G 22" Full HD Dental Monitor (White) - Manual (Page 52)

52
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
DDC/CI
Activates the DDC/CI protocol to allow users
to configure the monitor by a software using
two wires on the VGA, HDMI, DisplayPort, or
DVI cables.
Press the
t
or
u
button to
select the setting.
ON
OFF
BLUE
SCREEN
Enables or disables the blue screen feature.
If the setting is set to ON , it displays a blue
screen when no signal is available.
SIGNAL INFO
Enables or disables the signal information to
be displayed on the screen.
Alink
Enables or disables HDMI Consumer
Electronics Control control.
If the setting is set to On , you can control the
connected HDMI-CEC compatible device on
the same power on or power off status.
Note: This menu option is only available if
the input source is HDMI.
LOGO
Enables or disables the logo feature.
If the setting is set to ON , the AG Neovo
logo is briefly displayed after the display is
powered on.
LED Sets the display LED indicator on or off.
RESET
Use to reset all to default settings, except
Language, and the input source.
Press the
u
button to
execute the function.
-