AG Neovo DR-22G 22" Full HD Dental Monitor (White) - Manual (Page 32)

32
USING THE LCD DISPLAY
3.7 Using Auto Adjustment Function
Hot Key: Auto Adjustment/Rotate
Auto Adjustment function automatically tunes the LCD display to its
optimal setting, including horizontal position, vertical position, clock,
and phase.
Press the button to perform auto adjustment.
The message auto adjusting is displayed on the screen.
A U T O
A D J U S T I N G
During auto adjustment, the screen will slightly shake for a few
seconds.
When the message disappears, auto adjustment is completed.
3.8 Using ROTATE Function
The ROTATE function allows you to rotate the screen image at 180°.
Press the button for 3 seconds to rotate the picture 180 º .
After ROTATE
image
After executing ROTATE, press the button for 3 seconds again to
rotat
e the picture back to its normal state.
Original screen
image
Note:
♦
Auto Adjustment function is
available only during VGA input
signals.
♦
It is recommended to use the
auto adjustment function when
using the LCD display for the
first time or after a resolution or
frequency change.
♦
It is recommended to perform
the Auto Adjustment function
only when the image (non-
black) is displayed in full
screen.
Note:
♦
ROTATE function can only be
executed if PIP is off, see page
46.