beautypg.com

Displaying zebra patterns, Displaying zebra patterns 91 – Canon EOS C200 EF Cinema Camera and 24-105mm Lens Kit User Manual

Page 91

background image

91

Onscreen Markers and Zebra Patterns

To set the aspect ratio

1 Select [Marker Aspect Ratio], select the desired option and then press the joystick

• If you selected one of the preset aspect ratios, the rest of the procedure is not necessary. If you selected

[Custom], continue the procedure to set the desired aspect ratio.

2 Select [Marker Custom Asp. Ratio] and then press the joystick.

3 Push the joystick up/down to select the first digit of the aspect ratio and then press the joystick to move to the

next.

• Change the rest of the digits in the same way.

4 Select [Set] and then press the joystick.

To set the safe area

If an aspect marker is not selected, the safe area will be calculated as a percentage of the whole image ([Whole
Picture]) and you can only select the percentage (step 2). To calculate the safe area as a percentage of an aspect
ratio marker ([Selected Aspect Marker]), select an aspect ratio marker in advance and perform the procedure
from the beginning.

1 Select [Basis for Marker Safe Area], select the desired option and then press the joystick.

2 Select [Marker Safe Area %], select the desired percentage and then press the joystick.

NOTES

NOTES

• You can turn off all other onscreen displays, leaving only the onscreen markers (

A

60).

• Markers are not available when the video output from the HDMI OUT terminal is 4K (3840x2160) recorded at

59.94P or 50.00P.

• If you set an assignable button to [Markers] (

A

119), you can press the button to turn the onscreen markers

on and off.

Displaying Zebra Patterns

The camera has a zebra pattern function that shows black and white diagonal stripes over
areas that are overexposed. There are two types of zebra patterns and you can display both
simultaneously. Zebra 1 lets you identify areas within a certain range (±5% of a specified level
from 5% to 95%) while zebra 2 lets you identify areas that are over a specified level (from 0%
to 100%).

1 Open the [Zebra] submenu.

>

[

A

$

Assistance Functions]

>

[Zebra]

2 Select a zebra pattern.

3 Open the zebra level submenu.

>

[

A

$

Assistance Functions]

>

[Zebra 1 Level] or

[Zebra 2 Level]

4 Select the desired zebra level and then press the joystick.

5 Press the ZEBRA button to activate the selected zebra

pattern.

• Alternatively, before closing the menu, you can also select [Zebra: VIDEO Output] or [Zebra: VF Output]

1

,

select [On] and then press the joystick to display the zebra pattern from the VIDEO terminal or on the
camera viewfinder

1

.

1

k

only.

Zebra 1

Zebra 2

This manual is related to the following products: