Sb-r200’s available flash operations – Nikon 4804 R1 Wireless Close-Up Speedlight System User Manual
Page 60
60
1
SB-R200’s available flash operations
The following flash operations are available with the SB-R200. Refer to the
corresponding pages for details on each flash operation.
*1 The optional TTL Cord SC-30 is required (p. 123).
Note:
With CLS-compatible cameras, the TTL Cord SC-30 (optional) is not required.
v
Commander mode of SB-910, SB-900, SB-800 and SB-700
In the Commander mode, although the SB-910, SB-900, SB-800 or SB-700 is set as the
Master flash unit and its flash mode is set to Flash canceled (---), the flash will fire at a
reduced flash output level. This may affect the correct exposure of the subject if the subject
is close. To limit this effect as much as possible, bounce the light by tilting or rotating the
flash head.
Available flash operation Usable cameras and Speedlights
Close-up (p. 65)
CLS-compatible cameras, cameras not compatible with CLS
*1
,
SU-800
Commander (p. 79)
CLS-compatible cameras featuring Commander function,
SU-800, SB-910, SB-900, SB-800, SB-700