Nikon 4804 R1 Wireless Close-Up Speedlight System - Manual (Page 27)

27
Flash operation
using the Nikon Close-up Speedlight Commander
Kit R1C1
(Used with Nikon CLS-compatible cameras)
This section describes the necessary procedures for wireless
close-up and Commander flash operations with a CLS-
compatible camera when using the Nikon Close-up Speedlight
Commander Kit R1C1.
• For details on close-up flash operation, see page 65.
• For details on Commander flash operation, see page 79.
Procedures for close-up flash operation
1
Installing batteries in the SU-800.
2
Attaching the SU-800 to the camera.
3
Installing batteries in the SB-R200.
4
Attaching the SB-R200 to the front of the lens.
5
Turning on the camera, the SU-800 and SB-R200.
6
Setting the flash mode on the SU-800.
7
Setting a channel number on the SU-800 and SB-R200.
8
Setting a group on the SB-R200.
9
Compose a picture and shoot with flash.
Procedures for Commander flash operation
1
Setting Commander function on the SU-800.
2 Setting up the SB-R200.
3
Turning on the camera, the SU-800 and SB-R200.
4
Setting the flash mode on the SU-800.
5 Setting a channel and a group.
6
Compose a picture and shoot with flash.