Nikon 4804 R1 Wireless Close-Up Speedlight System - Manual (Page 127)

127
z
Referen
c
e
infor
m
ation
Communication error warning with the SB-R200
If, due to a weak battery etc., data communication fails
with either group A or B when using a camera not
compatible with CLS, even though the SU-800 and the
SB-R200 are properly connected, the corresponding
group (A or B) indicator blinks. The “Using cords”
indicator does not blink.
• If data communication fails with both groups A and B, the
“Err” indicator is displayed, and the “Using cords” indicator
blinks.
In the Commander mode
Using cords indicator
If the SU-800 is mounted on cameras not compatible
with CLS, the Commander function does not work.
Warning indicators appear if the Commander mode
is set.
• When the SU-800 is mounted on CLS-compatible cameras,
the SU-800 and SB-R200 will not work if these units are
connected using cords. Warning indicators will appear.
Incompatible camera warning
The SU-800 cannot be used with COOLPIX-Series
cameras other than COOLPIX P7100, P7000 and
P6000. If used, the Wireless flash indicator blinks as a
warning.
Incompatible lens warning
When used in combination with a non-CPU lens, if the
flash mode is set to Auto Aperture flash (AA), the AA
mode indicator blinks to warn you that the flash units in
that group will not fire.