Nikon 4804 R1 Wireless Close-Up Speedlight System - Manual (Page 50)

Flash operation using the R1
50
4
Setting the Commander function on the camera.
1 Set the Commander function on the camera and flash mode on
the SB-R200.
• Be sure to read the user’s manual of the camera in use.
u
Notes on using camera’s built-in flash in Commander mode
u
Using the IR Panel for Built-in Flash SG-3IR
Built-in flash units on cameras such as the D70-Series fire at reduced flash output levels
when used as Commander units. This may slightly affect results if pictures are taken from
close distances. To prevent this, use the SG-3IR.
1 Attach the SG-3IR to the camera’s
accessory shoe.
2 Set up the SG-3IR and the built-in flash unit as
shown in the illustration.
Camera Available flash mode of
built-in flash Usable channel
number Usable group
D800-Series,
D700, D300-
Series, D200,
D90, D80, D7000 TTL, M, -- (Flash canceled) 1 to 4 A, B
D70-Series (Flash canceled) 3 A