Nikon 4804 R1 Wireless Close-Up Speedlight System - Manual (Page 37)

37
z
Flash
operation using the R1C
1
9
Compose a picture and shoot with flash.
1 Compose the picture and shoot.
Confirm that the red ready-lights on the
SU-800 and SB-R200 are on then release
the shutter.
• For details on test firing, refer to page 88.
v
If the red ready-light blinks immediately after shooting
In TTL mode, when the SB-R200 flash has fired at its maximum
output and underexposure may have occurred, the red ready-
light on the SB-R200 will blink for approx. 3 sec. (The ready-
lights on the SU-800 and in the camera’s viewfinder do not
blink.)
To compensate, set a higher ISO sensitivity or use a wider
aperture and reshoot.
ON
READY
LOCK
E
L
SEL
A B
O
ON/O
FF
WIR
ELE
SS R
SPEEDLIG
HT S