Peerless-AV XHB754 4K UHD Xtreme High Bright LED Outdoor Display (75") - Manual (Page 22)

22 2022-07-07 #:180-9161-3 (2022-11-10)
Navigating the On-Screen Menu
Navigate Enter Exit Return
OK MENU EXIT OK MENU EXIT OK MENU EXIT OK EXIT
TV/SPK
1 3 2
4 6 5
7
•
9
LAST
8
0
OK
MUTE
VOL
MENU
CH INFO
INPUT
EXIT
Setup
Network Information
Allows the user to get a visual readout of the IP information that the display
has been issued. Display default is DHCP (IP Information can be viewed
through the web page).
(Information Only)
Sensor Information
Allows the user to get a visual readout of the sensors with the display that
are used for monitoring the health and wellness (Sensor Information can be
viewed through the web page).
(Information Only)
Peerless-AV Technical Support
Allows the user to see model number, serial number, and firmware revision.
(Information Only)
Restore Factory Default
Allows the user to set the display to factory default settings.
Yes / No
peerConnect
Allows the user to set the display to react to CEC (Consumer Electronic
Control) for ease of navigation when using a source that complies with the
CEC standard.
On / Off
Auto Source Switching
Allows user to set the display to search for a content signal if the signal on the
main source ceases.
On / Off
Priority Source Recovery
Allows the user to initiate the display to look for a specific input defined by
“Primary” and “Secondary”; If the Primary source is removed, the priority
becomes what is chosen as “Secondary”.
On / Off
Primary Source
Allows the user to indicate the main source input.
AV / DP / HDMI 1 /
HDMI 2 /
USB Media /
Component
HDBaseT
Secondary Source
Allows the user to set the secondary priority source if content ceases on the
primary source input.
AV / DP / HDMI 1 /
HDMI 2 /
USB Media /
Component
HDBaseT
Software Update
Allows the user to issue a software update through the USB media port when
available.
Yes / No
Auto Source Switching