Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual

Page 78

Note:

If the Standby Mode setting is set to

Communication On

in the Operation menu, you can receive

e-mail alerts even if the projector is in standby mode (the power is off). The Standby Mode setting is
displayed only if the A/V Output setting in the Signal I/O menu is set to

While Projecting

, the Auto

Power On setting in the Network menu is set to

Off

, and the Power On Trigger setting in the Operation

menu is set to

Plug-in Detection

Press the

Menu

button.

Select the

Network

menu and press

Enter

Select

Network Settings

and press

Enter

Select the

Mail Notification

menu and press

Enter

Turn on

Mail Notification

Enter the IP address for the

SMTP Server

setting.

Note:

Do not use 127.x.x.x (where x is a number from 0 to 255).

Select a type of

Authentication

for the SMTP server.

Select a number for the SMTP server

Port Number

setting, from 1 to 65535 (default is 25).

Enter a

User Name

for the SMTP server.

10. Enter a

Password

for the SMTP server authentication.

11. Enter the sender's email address as the

From

setting.

12. Choose an

Address

field, enter the e-mail address, and select the alerts you want to receive there.

Repeat for up to three addresses. Your e-mail address can be up to 64 alphanumeric characters
long.

13. If you are using the PJLink protocol for projector control, turn on the

PJLink

setting in the Projector

Control menu and enter the IP address where you want to receive PJLink notifications as the

Notified IP Address

setting.