Saving a scheduled event – Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual

Page 193

193

Parent topic:

Adjusting Projector Features

Saving a Scheduled Event

You can select projector commands you want to perform and schedule them as an event.

Note:

Light Source Calibration events do not start if the projector is not used continuously for at least 20

minutes, or if the projector is regularly turned off by shutting off the power outlet. Set Light Source
Calibration events to occur only after 100 hours of usage.

Note:

The

Schedule

setting in the Menu Protection menu must be turned off to schedule an event.

Set the date and time in the

Management

menu.

Press the

Menu

button.

Select the

Management

menu and press

Enter

Select the

Schedule Settings

setting and press

Enter

Select the

Schedule

menu and press

Enter

Select

Add New

and press

Enter