Selecting the connected usb source – Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual

Page 44

Connect the USB cable (or USB flash drive) to one of the projector's

USB-A

ports.

Note:

Use the USB cable supplied with or specified for use with your device. Do not connect a USB

hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.

Connect the other end of the cable (if applicable) to your device.

Parent topic:

Connecting to External USB Devices

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to one of the ports. To display the
connected USB device, select the

USB1

source.

Note:

If you have connected a document camera using a USB cable, select the

USB2

source.

Make sure the connected USB source is turned on, if necessary.

Press the

USB

Source Search

button on the remote control and select the

USB1

USB2

source.

Parent topic:

Connecting to External USB Devices