Solutions when "no signal" message appears – Epson PowerLite 800F 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw Laser 3LCD Projector (White) User Manual

Page 258

258

• Press the

Menu

button. If the projector menu displays, there may be a problem with the connected

video source, cable connection, or port.

• Adjust the

Brightness

setting on the Image menu.

• Adjust the brightness of your projector's light source.

• Check the Display menu to make sure the

Messages

setting is set to

• If the projector does not respond when you press the control panel buttons, the buttons may be

locked. Unlock the buttons.

• If the projector does not respond when you press buttons on the remote control, make sure the remote

receivers are turned on.

• For images projected with Windows Media Center, reduce the screen size from full screen mode.

• For images projected from applications using Windows DirectX, turn off DirectX functions.

• The projector may not be able to project copyrighted videos that you play back on a computer. For

details, see the manual supplied with your computer.

• If you cannot project a screen mirroring image, make sure the

Capture

setting is disabled.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the

Reset

menu.

Parent topic:

Solving Image or Sound Problems

Related references

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:

• Press the

Source Search

button and wait a few seconds for an image to appear.

• Turn on the connected computer or video source, and press its play button to begin your presentation,

if necessary.