Epson Expression Premium XP-7100 Small-In-One Inkjet Printer User Manual
Page 236
236
Caution:
Do not remove any other labels or seals, or ink will leak.
9.
Insert the ink cartridge at a slight angle into the ink cartridge holder as shown. Then press the ink
cartridge all the way down as shown until it clicks into place.
10. After you replace all the cartridges that need replacing, close the scanner unit and select
Completed
on the LCD screen.
The print head moves to its home position and the product starts charging the ink. This takes a few
minutes. When you see a completion message on the LCD screen, ink replacement is complete.
Note:
If you see an error screen telling you an ink cartridge is installed incorrectly, lift up the scanner
unit and press the ink cartridge down until it clicks into place. When you're finished, close the
scanner unit.
Caution:
Do not turn off the product while ink is charging or you may not be able to print.
Caution:
If you remove an ink cartridge for later use, recap the ink cartridge using the cap that came
with it to prevent the ink from drying out and to protect the surrounding area from getting smeared by ink.
Store the ink cartridge in the same environment as the product. Do not leave the product with the ink
cartridges removed for an extended period of time. Otherwise, ink remaining in the print head nozzles
may dry out and you may not be able to print.
Parent topic:
Related concepts