Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer - Manual (Page 70)

70
5. Slide the edge guides against the paper, but not too tightly.
Note: Make sure the paper fits under the tabs on the edge guides.
6. Slide the cassette back into the product until it stops.
7. Select the size and type of the paper you loaded on the product LCD screen. If your paper size is not
displayed, select
User Defined .
Note: If you are printing on letterhead, select Letterhead as the paper type. If you select Letterhead
and you are printing on paper that is smaller than the printer driver setting, make sure you select the
correct paper size setting or the printer may print beyond the edges of the paper. Two-sided printing
is not available on letterhead paper.
8. Do one of the following:
• Close the paper cassette cover.