Enabling wi-fi direct mode (simple ap) – Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer User Manual
Page 50
50
Enabling Wi-Fi Direct Mode (Simple AP)
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
1.
Press the
home button, if necessary.
2.
Select the
icon.
You see a screen like this:
3.
Select
Wi-Fi Direct
.
4.
Select
Start Setup
.
5.
Select
Start Setup
again.
6.
Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen and enter the displayed password.
Note:
You can also scan the QR Code on the LCD screen to view online setup instructions.
7.
When you are finished, scroll down on the product's LCD screen and select
OK
.
8.
Press the
home button to return to the Home screen.
The
Wi-Fi Direct icon displayed on the LCD screen indicates if Wi-Fi Direct is enabled on the
product. If your device is not connected, repeat step 6 and make sure you enter the password correctly.