Print head cleaning – Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer User Manual
Page 246
246
If there are gaps or the pattern is faint, clean the print head. If almost the entire pattern is missing,
see the link below for instructions on performing a Power Cleaning.
Parent topic:
Related tasks
Cleaning the Print Head Using a Computer Utility
Power Cleaning Using a Computer Utility
Refilling the Ink Tank
Related topics
Print Head Cleaning
If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.
Note:
You cannot clean the print head if the ink level has reached the lower line on the ink tank, and may
not be able to clean it when the ink level in the tank is low. You must refill the ink tank first.
Cleaning the Print Head Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility
Parent topic:
Related tasks
Cleaning the Print Head Using the Product Control Panel
You can clean the print head nozzles using the control panel on your product.
1.
Make sure there are no errors on the LCD screen.
2.
Load a few sheets of plain paper in the paper cassette.
3.
Press the
home button, if necessary.
4.
Select
Maintenance
.