Connecting to a new wi-fi router – Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer User Manual
Page 64
64
4.
Uninstall your product software.
5.
Download and install your product software from the Epson website.
6.
Follow the on-screen instructions to install the software.
7.
When you see the Select Your Connection screen, select
Wired network connection
.
8.
If you see a Select Setup Option screen, select
Set up printer for the first time
.
9.
Continue following the rest of the on-screen instructions.
Parent topic:
Changing or Updating Network Connections
Related concepts
Uninstall Your Product Software
Related tasks
Connecting to a New Wi-Fi Router
If you change the wireless router you have been using on your network, you need to update your
product's Wi-Fi connection to the new router.
Note:
If you switch to a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and
5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and 5 GHz band,
give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and Home
Network 5 GHz. See your router documentation for instructions.
1.
Do one of the following:
•
Windows
: Uninstall your product software.
•
Mac
: Go to the next step.
2.
Download and install your product software from the Epson website using the instructions on the
Start Here
sheet.
Parent topic:
Changing or Updating Network Connections
Related concepts