beautypg.com

Lcd screen safety instructions, Wireless connection safety instructions – Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer User Manual

Page 339

background image

339

• Do not open the scanner section while the product is copying, printing, scanning, or performing any

other functions.

• Be careful not to trap your fingers when closing the document cover or printer cover.

• Except as specifically explained in your documentation, do not attempt to service or disassemble the

product yourself.

• Unplug the product and refer servicing to qualified service personnel under the following conditions: if

the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped
or the case damaged; if the product does not operate normally or exhibits a distinct change in
performance. Adjust only those controls that are covered by the operating instructions.

• Before transporting the product, make sure that the print head is in the home (far right) position.

• When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down;

otherwise, ink may leak.

Parent topic:

Important Safety Instructions

LCD Screen Safety Instructions

• Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.

• If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash

them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them
immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.

• Do not press too hard on the LCD screen or subject it to heavy impacts.

• Do not use a pointy or sharp object, such as a pen or your fingernail, to operate the LCD screen.

• If the LCD screen chips or cracks, do not touch or attempt to remove the broken pieces; contact Epson

for support.

• Do not subject your product to sudden changes in temperature or humidity; this may cause

condensation to develop inside the LCD screen and degrade its performance.

• The LCD screen may contain a few small bright or dark spots, and may display uneven brightness.

These are normal and do not indicate that the screen is damaged in any way.

Parent topic:

Important Safety Instructions

Wireless Connection Safety Instructions

Radio waves from this product may adversely affect the operation of medical equipment or automatically
controlled devices, such as pacemakers, automatic doors or fire alarms. When using this product near