Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer - Manual (Page 320)

320
• If you are receiving faxes using the FAX Utility, check that your product is registered as a fax product
in your operating system:
Windows: Make sure the product appears in Devices and Printers , Printer , or Printers and Other
Hardware . If the product does not appear, uninstall and re-install the FAX Utility.
Mac: Select System Preferences > Printers & Scanners (or Print & Scan or Print & Fax ) and make
sure your product appears. If your product does not appear, click + and add your product. If the
product does appear, double-click it and make sure it is not paused.
Note: If your product is connected to a VoIP (Voice over Internet Protocol) phone line, keep in mind that
fax machines are designed to work over analog phone lines. Epson cannot guarantee that fax
transmission will work when using VoIP.
If your phone line includes voice mail answering services, calls or faxes may be inadvertently received
by your voice mail service.
Parent topic: Solving Faxing Problems
Related tasks
Setting Up the Fax Utility - Windows
Setting Up Fax Features Using the Fax Utility - Mac
Checking Fax Status
Printing Fax Reports
Selecting the Date and Time
Related topics
Setting Up Fax Features
Cannot Receive Faxes with a Telephone Connected to Your Product
If you cannot receive faxes when a telephone is connected to your product, try these solutions:
• Make sure your telephone is connected to your product's EXT port.
• Make sure the Receive Mode is set to Manual .
Note: When answering a call that is a fax, wait until the product's LCD screen displays a message that a
connection has been made before you hang up.
Parent topic: Solving Faxing Problems