Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer User Manual
Page 238
238
Note the following precautions when replacing the maintenance box:
• Do not remove the maintenance box or its cover except when replacing the maintenance box;
otherwise, ink may leak.
• Do not touch the green chip on the side of the maintenance box.
• Do not tilt the maintenance box after removing it or ink may leak.
• Do not touch the openings in the maintenance box or you may get ink on you.
• Do not drop the maintenance box or subject it to strong shocks.
• If you cannot replace the cover, the maintenance box may not be installed correctly. Remove and
reinstall the maintenance box.
• Do not store the maintenance box in high or freezing temperatures.
• Do not replace the maintenance box during printing; otherwise, ink may leak.
• If you cannot close the maintenance box cover, make sure the maintenance box is installed properly.
• Keep the maintenance box out of direct sunlight.
Caution:
Do not reuse a maintenance box that has been removed and left uninstalled for a long period.
Keep the maintenance box away from direct sunlight.
Note:
The maintenance box is a user-replaceable part and is not covered by the product warranty.
Parent topic: