Network interface specifications – Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer User Manual
Page 335
335
Network Interface Specifications
Wi-Fi
Standard
IEEE 802.11 b/g/n; IEEE 802.11n is available only for the HT20
Frequency range
2.4 GHz
Maximum radio-frequency
power transmitted
20 dBm (EIRP)
Coordination modes
Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Note:
Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
Security
WPA2-PSK (AES); complies with WPA2 with support for
WPA/WPA2 Personal; Wi-Fi Direct supports only WPA2-PSK (AES)
security
WEP (64/128 bit)
Ethernet
Standard
IEEE802.3i (10BASE-T); use a category 5e or higher shielded
twisted pair cable to prevent radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector
RJ-45
Security Protocol
SSL/TLS: HTTPS Server/Client, IPPS
Parent topic: