Sony ZRD-B12A Micro LED Video Wall Modular Display - Manual (Page 6)

6
Overview
You can connect the Display Cabinets based on the installation location and intended use, convert the
video content signals that are input to the Display Controller based on the array size, and output the
signals onto the Display Cabinets. 4K2K video can be controlled via a single display controller. Control of
the Display Cabinets is performed from a computer on which Display Control Software is installed.
Daisy-chain connections can be configured between Display Cabinets using a power cord (not supplied)
and a Category 7 cable (not supplied). (For details on the number of Display Cabinets that can be
connected, refer to the Installation Manual.)
When connecting the Display Controller to a network, use a network that is built to control and regulate
access from the Internet, such as a LAN. Direct connection from the Internet increases security risk.
System Configuration Diagram
Configuration example of the entire system
Caution
Video content transmitters
Production monitors
Matrix
switcher
Video
processor
• DisplayPort
connector
• HDMI
connector
Control (LAN)
Control (LAN) Hub
VPN router
Controller PC
(Display Control Software installed)
Array
(Display Cabinets)
Display Controller
Display Controller
Category 7
cable
Category 7 cable