Sony ZRD-B12A Micro LED Video Wall Modular Display - Manual (Page 17)

17
• [SMPTE ST 2084 (C/CH Series)]: Display
SMPTE ST 2084 standard HDR images
formatted for ZRD-CH12D/C12A or ZRD-
CH15D/C15A.
• [Off]
[HDMI Auto Setting]: When HDMI input is
selected, automatically identify HDR
content and display them in the
appropriate HDR format.
• [HDMI Auto Setting] is available in
Display Control Software v01.01.00 or
later.
• When the [HDMI Auto Setting] setting is
enabled, images may be displayed with
the settings configured in [HDR].
– When SMPTE ST 2084 input signal is
automatically identified, if the setting
value configured in [HDR] is [SMPTE ST
2084 (B/BH Series)], [SMPTE ST 2084
(C/CH Series)], or [SMPTE ST 2084
(Sim.)], images are displayed with
these settings. For the setting values
other than these, images are
displayed with the settings configured
in [LED Model].
– When an input channel other than
HDMI is input, automatic signal
identification is not possible. If this is
the case, images are displayed
according to the mode set for [HDR].
– Even when the input channel is set to
HDMI, HDR content may not be
automatically identified depending
on the input signal. When this is the
case, images are displayed according
to the mode set for [HDR].
• To automatically set the color space,
select [Auto(HDMI)] for [Color Space].
[Color Space]: Select the color space.
• [sRGB]: Display the picture using the
sRGB color space standard.
• [Native]: Display the picture with the
Display Cabinet's color space of the
three primary color chromaticity points.
• [AdobeRGB]: Display the picture using
the Adobe RGB color space standard.
• [DCI_P3]: Display the picture using the
DCI color space standard.
• [BT.2020]: Display the picture using the
BT.2020 color space standard.
• [S-Gamut]/[S-Gamut3]/
[S-Gamut3.Cine]: Display the picture
using the color space defined by Sony.
• [Custom9] to [Custom10]
• [Auto(HDMI)]: During HDMI input,
automatically set the color space based
on the additional input signal
information.
• [AdobeRGB], [DCI_P3], and [BT.2020] do
not include the entirety of the color
spaces defined by their respective
standards.
• [Custom9] to [Custom10] are settings
used for maintenance services.
• [Auto(HDMI)] is available in Display
Control Software v01.01.00 or later.
• When [Auto(HDMI)] is selected, if an
input channel other than HDMI is input
or additional information cannot be
obtained from the HDMI input signal,
images are displayed in sRGB.
[Transfer Matrix]: Set the transfer matrix for
HDMI input.
• Auto
• BT.601
• BT.709
• BT.2020
[Light Output]: Select the output strength to
use during low light-source output. The
light-source output becomes stronger in
order from [Step1] to [Step6].
[Color Temperature Settings]: Select the
color temperature in [Color Temperature].
• If you selected [D93], [D65], [D50] or
[DCI], proceed to step 4 .
• If you selected [User1] to [User40],
proceed to step 3.
[Copy From]: The setting value from
another [Color Temperature] can be
copied to the selected [Color
Temperature].
Copying is not possible when D93/D65/
D50/DCI is selected.
[Rename]: A desired name can be
assigned to the selected [Color
Temperature].
Caution
Caution
Caution