Sony ZRD-B12A Micro LED Video Wall Modular Display - Manual (Page 23)

23
[Camera Synchronized]: Configure the
synchronization with the camera being used
for shooting.
These setting items are used to reduce
artifacts that may occur in captured images
when shooting LED display.
• [Mode]: Select whether to enable/disable
the synchronization settings for shooting
with the camera.
[OFF]: Disable the settings for
synchronization with the camera being
used for shooting.
[ON]: Enable the settings for
synchronization with the camera being
used for shooting.
Default value: OFF
• [Preset]: Displays the setting values from
[Camera Frame Rate] to [Smoothing Low-
level Exposure] when selecting one of
[Preset1] to [Preset100]. When shipped
from the factory, all modes are set to the
same setting.
[Copy From]: Copy setting values from
other Presets to the selected Preset.
[Rename]: Give a unique name to the
selected Preset.
• [Camera Frame Rate]: Select from the
following to set the frame rate for the
camera being used for shooting.
[23.98] (Default value)/[24]/[25]/[29.97]/
[47.95]/[50]/[59.94]
• [Preferring External Sync]: Set whether to
give priority to the external sync signal
when the video input sync signal is
different from the external sync signal.
Check this checkbox to give priority to the
external sync signal.
Default: Unchecked
This setting is available when [Camera
Frame Rate] is set to [23.98] and the input
signal is 29.97/59.94/119.88 fps, or when
[Camera Frame Rate] is set to [24] and the
input signal is 30/60/120 fps.
• [Shutter Mode]: Select the shutter mode
from the following.
[Angle]: This mode allows you to select the
shutter angle. Select the shutter angle
from the following.
[72]/[90]/[180] (Default value)/[360]
[Speed]: This mode allows you to select the
shutter speed. Select the shutter speed
from the following.
[1/50]/[1/60] (Default value)/[1/100]/
[1/120]/[1/250]
Default value: Angle
This setting takes effect when [Mode] is set
to [ON].
• [Exposure Offset]: Make fine adjustments
to the shutter angle. Fine adjustment is
also possible when the shutter speed is
selected.
Setting range: -9 to 0
Default value: 0
• [Camera Scan Speed]: Select the scan
speed of the camera being used for
shooting.
[Fast]: Select when the scan speed of the
camera being used for shooting is fast.
[Slow]: Select when the scan speed of the
camera being used for shooting is slow.
Default value: Fast
• [Smoothing Low-level Exposure]: This is
the setting item to reduce or eliminate
unevenness, such as striped patterns, that
may occur in captured images when
shooting dark images.
[Scrambled Grayscale]: Enable/disable the
gradation display (dithering) function
based on the number of flashes within a
single frame.
When enabled, gradation in dark areas is
improved, but unevenness in images
becomes more visible.
When disabled, gradation in dark areas is
degraded, but unevenness in images
Caution
Caution