Sony ZRD-B12A Micro LED Video Wall Modular Display - Manual (Page 21)

21
[Edit]: When a pattern between [Custom1] and
[Custom4] is selected from the [Cabinet Test
Pattern] drop-down list, the [Edit] button
becomes pressable. When [Edit] is pressed,
the [Cabinet Test Pattern Custom Settings]
screen is displayed.
The colors of the selected Custom pattern can be
adjusted.
[Red]/[Green]/[Blue] can each be adjusted to a
value ranging from 0 to 1023.
The default value differs depending on the
pattern that is selected between [Custom1] and
[Custom4].
The adjusted values are saved and applied the
next time Display Control Software is started up.
Displaying the selected test
pattern on a Display Cabinet
To specify a Display Cabinet and display/hide
the test pattern
Under [Cabinet Layout], click the grid for the
Display Cabinet on which you wish to display the
selected test pattern.
The test pattern can be displayed/hidden by
clicking the grid for that Display Cabinet.
Display Cabinet grid display status:
: The test pattern display on the Display
Cabinet is OFF. (The test pattern is not
displayed.)
: The test pattern display on the Display
Cabinet is ON. (The test pattern is displayed.)
Selecting a Display Controller to display/hide
the test patterns on all the Display Cabinets
The test patterns on all the Display Cabinets
connected to the selected Display Controller can
be displayed (ON)/hidden (OFF) by selecting a
Display Controller under [Controller List], then
selecting [ON] or [OFF] for [All cabinets of the
selected controller].