Sony ZRD-B12A Micro LED Video Wall Modular Display - Manual (Page 24)

24
becomes less visible.
[OFF]: Disable the dithering function.
[ON]: Enables the dithering function.
Default value: ON
[SBM Strength]: Adjust the intensity of SBM
processing to reduce unevenness in
images when using the synchronous mode
of camera shooting.
As the numeric value increases,
unevenness in images becomes less
visible, but flickering in dark images
becomes more visible.
Select the optimum value while visually
checking the images captured by the
camera.
Setting range: 1 to 5
Default value: 1
Using Network Features
Connection to the network allows you to operate
the following features:
• Changing the password.
• Setting the ADCP protocol.
• Setting the support network monitoring
protocol (SNMP).
• Setting the Art-Net.
• When connecting the Display Controller with
the network, consult with the network
administrator. The network must be secured.
• When connecting the Display Controller to a
network, use a network that is built to control
and regulate access from the Internet, such as
a LAN. Direct connection from the Internet
increases security risk.
• SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES ON
TRANSMISSION DEVICES, UNAVOIDABLE DATA
LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF
ANY KIND.
• Depending on the operating environment,
unauthorized third parties on the network may
be able to access the unit. When connecting
the unit to the network, be sure to confirm that
the network is protected securely.
• When using the Display Controller connected
with the network, access the control window
via a Web browser. It is recommended to
change the password regularly.
• When the setting on the Web browser is
completed, close the Web browser to log out.
• The menu displays used for the explanation
below may be different depending on the
model you are using.
• Supported Web browsers are Microsoft Edge
(Chromium), Google Chrome, Safari.
• The menu displays only English.
• If the browser of your computer is set to [Use a
proxy server] when you have access to the
Display Controller from your computer, click the
check mark to set accessing without using a
proxy server.
• IPv6 is not supported.
• For security reasons, when using the SNMP
services, it is recommended to restrict third-
party access by entering the IP address of the
host receiving SNMP packets under [Host
address list] in the settings.
Notes