Sony ZRD-B12A Micro LED Video Wall Modular Display - Manual (Page 28)

28
• [Version Mismatch Warning]: The version of the
software on the connected Display Controller is
not the latest version. The Display Controller
and Display Cabinet need to be updated
promptly.
• [No Backup Warning]: Displayed when the
settings for the connected Display Controller
have not been backed up at all. Select [Back Up
Controller Data] under [Tool] in the menu to
perform the backup again.
[Controller List]
Displays the status of each Display Controller.
[Power Status]: “-” indicates that
communication with the Display
Controller is not possible.
[Error]: “None” indicates that there are no
errors or warning.
If an error or warning occurs, see “Error
Codes” (page 29), and resolve the
problem as soon as possible.
You can view information on a Display
Controller by double-clicking its controller
number or by right-clicking it and selecting
[Controller Info.].
[Array Information]
Displays the status of each Display Cabinet.
You can view information on a Display Cabinet by
double-clicking within its frame or by right-
clicking it and selecting [Cabinet Info.].
If the controller PC is slow
By suspending the connection to the Display
Controllers, you can avoid slow communication
responses that may occur when using other
applications, for example.
Select [Disconnect] in the [System] menu on the
main screen of Display Control Software to
suspend communication with the Display
Controllers.
The following dialog box is displayed while
communication is suspended.
To reestablish connection
Close the dialog box.
Entering the forced standby mode
If the controller PC hangs, for example, you can
force Display Controllers and Display Cabinets
into standby mode.
1
Press and hold the power switch on the
Display Controller for at least 5 seconds.
The forced standby mode is entered, and the
POWER indicator lights red.
2
Press and hold the power switch again for
about 2 seconds.
After the POWER indicator blinks red/orange,
the normal standby mode is entered.
The Display Cabinets will also enter the
normal standby mode.
Note
(gray): The Display Cabinet is turned on.
(black): The Display Cabinet is turned off.
(maroon): An error has occurred on the
Display Cabinet.
(ocher): A warning has occurred on the
Display Cabinet.
(black): A Display Cabinet does not exist.
Note