Roland V-8HD HDMI Video Switcher - Manual (Page 67)

67
Menu List
Menu item Value
(Bold: default) Explanation
AUDIO LEVEL METER OFF, ON
Specifies whether the audio level meter is shown (ON) or not shown (OFF) in
the multi-view monitor.
AUDIO IN OFF , LOWER, UPPER
Specifies whether the AUDIO IN audio level meter is shown (LOWER or UPPER)
or not shown (OFF).
MULTI-VIEW LABEL OFF, ON
Specifies whether the label is shown (ON) or not shown (OFF) in the multi-view
monitor.
MULTI-VIEW LABEL EDIT HDMI 1 –8, STILL 1–8
Edit the label name shown in the multi-view monitor.
Press the [VALUE] knob to access the MULTI-VIEW LABEL EDIT screen.
MULTI-VIEW LAYOUT
Specifies the screen layout of the PVW section and PGM section shown in the multi-view monitor.
PVW.PGM PGM.PVW BLACK.PGM PGM.BLACK
PVW PGM PGM PVW PGM
The PVW section is not shown.
PGM
The PVW section is not shown.
OUTPUT 3 OSD
ENTER Displays the following OUTPUT 3 OSD menu.
Menu item Value (Bold: default) Explanation
ON SCREEN MENU OFF, ON Specifies whether the menu is shown (ON) or not shown (OFF).
TARRY FRAME OFF, ON
Specifies whether the the tally frame is visible (ON) or hidden (OFF) in the multi-
view monitor.
* This is valid when “OUTPUT ASSIGN” is set to “MULTI-VIEW.”
LABEL/LEVEL METER/MARK OFF, ON
Specifies whether the “label,” “audio level meter,” “AUX indicator,” and “REC indicator”
of the multi-view monitor are shown (ON) or not shown (OFF).
* This is valid when “OUTPUT ASSIGN” is set to “MULTI-VIEW.”
AUTO INPUT DETECT OFF , ON
Turns the auto input detect function on/off.
If this is “ON,” and the video that is being output as the program disappears, the
program automatically switches to another input video.
AUTO OFF OFF, ON
Turns the Auto Off function on/off.
If this is “ON,” the power to the V-8HD turns off automatically when all of the
following states persist for 240 minutes.
5 No operation performed on the V-8HD
5 No audio or video input
5 No equipment is connected to the OUTPUT connectors
TEST PATTERN
OFF , 75% COLOR BAR,
100% COLOR BAR, RAMP, STEP,
HATCH
Specifies the test pattern.
TEST TONE
OFF , -20dB@1kHz, -10dB@1kHz,
0dB@1kHz
Specifies the test tone.
VIDEO FADER CALIBRATE ENTER
Displays the VIDEO FADER SET screen.
Following the instructions on the screen, calibrate (adjust) the video fader.
In some cases, because of continued use or transport, the video output might
not reach 100% even if you slide the video fader all the way to the top or
bottom. Execute video fader calibration in this case as well.
FACTORY RESET EXEC Returns the unit to its factory defaults.
VERSION — Displays the version of the system program.