Roland V-8HD HDMI Video Switcher - Manual (Page 28)

28
Video Operations
Deleting a Still Image
Here’s how to delete the still image that’s saved in the unit.
1 . Press the [MENU] button 0 ”STILL IMAGE” 0 select
“DELETE STILL IMAGE,” and press the [VALUE] knob.
2 . Turn the [VALUE] knob to select the still image you
want to delete, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Turn the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The still image is deleted. When the operation is finished, the
message “COMPLETE” appears.
* Do not turn off the power while the “PLEASE WAIT” message is
shown.
4 . Press the [MENU] button to quit the menu.
Freezing Input Video (Freeze)
This temporarily pauses the incoming video.
You can apply transition effects and visual effects during a video
freeze.
Setting the freeze mode
There are two freeze modes: “ALL” and “SELECT.”
* With the factory settings, “ALL” is selected.
Mode Explanation
ALL Freezes all video that is being input.
SELECT Freezes only the specified input video.
1 . Press the [MENU] button 0 ”FREEZE” 0 select
“TYPE,” and press the [VALUE] knob.
2 . Turn the [VALUE] knob to select “ALL” or “SELECT,”
and press the [VALUE] knob.
If “SELECT” is selected
3 . Turn the [VALUE] knob to select “INPUT 1”–“INPUT 8,”
and press the [VALUE] knob.
4 . Turn the [VALUE] knob to select “ENABLE” or
“DISABLE,” and press the [VALUE] knob.
Value Explanation
ENABLE The input video freezes.
DISABLE The input video does not freeze.
5 . Press the [MENU] button to quit the menu.