Roland V-8HD HDMI Video Switcher - Manual (Page 36)

36
Audio Operations
Sending the AUDIO IN Audio to the AUX Bus
You can send the input audio of the AUDIO IN jacks to the AUX bus.
1 . Press the [MENU] button 0 “AUDIO OUTPUT” 0
select “AUX,” and press the [VALUE] knob.
2 . Turn the [VALUE] knob to select the “AUX SEND”
menu item, and then press the [VALUE] knob.
3 . Turn the [VALUE] knob to select “ON” or “OFF,” and
press the [VALUE] knob.
Menu item Explanation
AUX SEND
Specifies the audio that is sent to the AUX
bus.
HDMI AUDIO
Specifies whether the input audio of INPUT
1–8 is sent (ON) or is not sent (OFF) to the
AUX bus.
AUDIO IN
Specifies whether the input audio of the
AUDIO IN jacks is sent (ON) or is not sent
(OFF) to the AUX bus.
4 . Press the [MENU] button to quit the menu.
Specifying the Type of Audio Sent to the
AUX Bus
When sending audio from INPUT 1–8 and AUDIO IN to the AUX bus,
you can specify whether to send the audio as-is or with an effect
applied.
1 . Press the [MENU] button 0 “AUDIO OUTPUT” 0
select “AUX,” and press the [VALUE] knob.
2 . Turn the [VALUE] knob to select the “AUX EFFECT”
menu item, and then press the [VALUE] knob.
3 . Turn the [VALUE] knob to select “DRY” or “WET,” and
press the [VALUE] knob.
Menu item Explanation
AUX EFFECT
Specifies the type of audio that is sent
from each input to the AUX bus.
INPUT 1–8
DRY:
Sends the source audio with no effects
applied.
WET:
Sends the effect-applied audio.
AUDIO IN
4 . Press the [MENU] button to quit the menu.