Roland V-8HD HDMI Video Switcher - Manual (Page 58)

58
Menu List
9: AUDIO OUTPUT
OUTPUT ASSIGN
Menu item Value
(Bold: default)
Explanation
AUDIO OUT
Specifies the audio bus assigned to the AUDIO OUT jacks.
MASTER OUTPUT Output the audio of the MAIN bus.
AUX Output the audio of the AUX bus.
PHONES OUT
Specifies the audio bus assigned to the PHONES jack.
MASTER OUTPUT Output the audio of the MAIN bus.
AUX Output the audio of the AUX bus.
MASTER OUTPUT
Menu item Value
(Bold: default) Explanation
OUTPUT LEVEL -INF– 0.0 –10.0dB Adjusts the output volume.
OUTPUT MUTE OFF , ON
Turns the mute function on/off.
If this is “ON,” the output audio is temporarily silenced.
LIMITER OFF , ON
Turns the limiter on or off.
Effect This limits the output volume so that is does not exceed the set level.
THRESHOLD 30– 380 –5000ms
Adjusts the level that becomes the threshold at which the limiter is applied.
Compression is applied to audio that exceeds the threshold. The volume level
of audio that is output is limited so as to stay to below the threshold.
EQUALIZER OFF , ON
Turns the equalizer on/off.
Effect Adjusts the tone for each frequency band.
Hi GAIN -15.0– 0.0 –15.0dB Boosts or attenuates the high band.
Hi FREQUENCY 1.0– 10.0 –20.0kHz Specifies the center frequency when changing the tone in the high band.
Mid GAIN -15.0– 0.0 –15.0dB Boosts or attenuates the middle band.
Mid FREQUENCY 20.0– 500Hz –20.0kHz Specifies the center frequency when changing the tone in the middle band.
Mid Q 0.5– 1.0 –16.0
Adjusts the width of the frequency band when boosting or attenuating the
middle band.
Lo GAIN -15.0– 0.0 –15.0dB Boosts or attenuates the low band.
Lo FREQUENCY 20.0– 500Hz –20.0kHz Specifies the center frequency when changing the tone in the low band.
MULTI BAND
COMPRESSOR
OFF , ON
Turns the multi-band compressor on/off.
Effect Applies separate compressors in individual frequency band.
Hi THRESHOLD -40.0– -20.0 –0.0dB
Specifies the threshold level at which the compressor is applied to the high
band.
Compression is applied to audio that exceeds the threshold.
Hi RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1,
1.60: 1, 1.80: 1, 2.00: 1, 2.50: 1,
3.20 : 1 , 4.00: 1, 5.60: 1, 8.00: 1,
16.0: 1, INF: 1
Specifies the amount of compression applied in the high band.
The state in which no compression is applied is defined as “1.”
Mid THRESHOLD -40.0– -16.0 –0.0dB
Specifies the threshold level at which the compressor is applied to the middle
band.
Compression is applied to audio that exceeds the threshold.
Mid RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1,
1.60: 1, 1.80: 1, 2.00: 1,
2.50 : 1 ,
3.20: 1, 4.00: 1, 5.60: 1, 8.00: 1,
16.0: 1, INF: 1
Specifies the amount of compression applied in the middle band.
The state in which no compression is applied is defined as “1.”
Lo THRESHOLD -40.0– -20.0 –0.0dB
Specifies the threshold level at which the compressor is applied to the low band.
Compression is applied to audio that exceeds the threshold.
Lo RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1,
1.60: 1, 1.80: 1, 2.00: 1, 2.50: 1,
3.20 : 1 , 4.00: 1, 5.60: 1, 8.00: 1,
16.0: 1, INF: 1
Specifies the amount of compression applied in the low band.
The state in which no compression is applied is defined as “1.”